FREQUENTLY
ASKED
QUESTIONS

HT-1 Specifications:
 
1What is the HT-1 Drive carriage and HT-1 Rail system material?
The HT-1 eDrive carriage & HyTek HT-1 Rail system are made from aerospace grade Aluminum 6061 T6.
2How much does the HT-1 HT-1 eStand weigh?
The HT-1 eStand weighs 100 lbs.
> HT-1 eDrive weighs 50 lbs
> HT-1 Rail system weighs 45 lbs
3What is the HT-1 Drive Powered by?
The HT-1 eDrive is Powered by 1 ~ 36v Lithium Ion Rechargeable Battery.
4How long does 1 battery charge last?
Each Charge Powers the HT-1 eDrive up to 20+ Up/Down Cycles.
5How high does the HyTek eStand elevate you?
The HyTek eStand elevates you from 1’ to 15’ high. The Rail System can extend to 20' with 1 an additional mono-rail. Additional Rail Systems are available for additional stand locations.
6How much weight does the HyTek HT-1 System lift?
The HT-1 System Lift Weight Rating: Tested up to 700 lbs // Max Rated for 350 lbs
HyTek Set Up:
 
1Is tree selection a factor?
We recommend setting up the HyTek HT-1 eStand system to a straight tree, similar to a climber stand.
2Is the HyTek HT-1 eStand physically demanding to set up?
The HyTek HT-1 eStand is a One Person Setup ~ Avg. 15-25 min.
3Can I use my treestand with the Hytek HT-1 eDrive system?
Most treestands connect to the HT-1 eDrive system with our provided Treestand Attachment Bracket.
4Can you hunt multiple locations with the eStand?
Yes, If you purchase additional Rail Systems the eDrive is removable from the rail and can be moved. Simply setup rail systems all over your property and move the eDrive and Treestand to whatever Rail System you choose to hunt that day.
HyTek Operation:
 
1Safety is #1 Priority
We provide a Hunter Safety System® Life-line with every HyTek eStand, 100% safety is #1 priority.
2How do you operate the powered HT-1 eDrive?
The HyTek HT-1 eDrive is powered with a wireless remote control or a manual push button for up & down operation.
3Are there speed controls on the HT-1 eDrive system?
The HyTek HT-1 eDrive has 2 variable speed control settings controlled with the remote.
4How long does it take to elevate to 20’?
> HIGH SETTING ~ 80 SECONDS
> LOW SETTING ~ 120 SECONDS
5What happens when the battery dies at an elevated position?
The HyTek HT-1 eDrive comes with a manual backup crank-down tool if the battery dies at an elevated position.
6How loud/noisy is the operating of the HT-1 eStand?
The HT-1 eStand is extremely quiet in the field.